Bunkering and distribution
Silo
Type: S
With a WIPA dosing container, a wide variety of materials such as film chips, fibers, foams, etc. are reliably fed into the downstream processes with only a small amount of energy. The success of the WIPA dosing containers lies in the innovative conveyor rails, which, when the conveyor rails move forward, allow the slides to fold out and thus powerfully transport the material in the discharge direction.
Silo
The procedure
If the conveyor elements move backwards, the conveyor elements contact each other and slide backwards through the material with little resistance. Very little material is retracted and the WIPA system consumes up to 75% less energy than conventional systems. While conveyor rails 1 and 3 move forwards, rails 2 and 4 move in the opposite direction. This takes place in continuous alternation. Thanks to the modular design of the containers, sizes from 6 to 1000m3 can be produced on the basis of identical or similar parts. The Silos can also be upgraded at a later date with little effort.
See for yourself:
This machine offers these advantages
- Electrical control of the hydr. components, the discharge screw and the opening roller are installed directly on the Silo
- Discharge rate in the standard version approx. 10m3/hour, which can be extended up to approx. 100m3/hour
- No bridging
- Silo practically infinitely expandable
- Approx. 75% energy saving compared to conventional systems
Type S 50
All data at a glance
Technical data | S 7 | S 10 | S 16 | S 20 | S 30 | S 50 | S 75 | S 100 | S 120 | S 150 | S 200 |
Volume m³ | 7,1 | 10,6 | 15,9 | 21,2 | 28,2 | 51 | 73,7 | 96,4 | 120,5 | 147,4 | 192,8 |
Width m | 1,4 | 1,4 | 2,1 | 2,1 | 2,8 | 2,8 | 2,8 | 2,8 | 3,5 | 2,8 | 2,8 |
Length m | 3,6 | 3,6 | 3,6 | 3,6 | 3,6 | 6,5 | 9,4 | 12,3 | 12,3 | 9,4 | 12,3 |
Height m | 1,4 | 2,1 | 2,1 | 2,8 | 2,8 | 2,8 | 2,8 | 2,8 | 2,8 | 5,6 | 5,6 |
Throughput rates and technical data are based on experience and may vary depending on the material.
